100% Certified Authentic

How to Change Straps and Bracelets on a Rolex Watch

Paul Altieri

If you’re a regular reader of the Bob’s Watches blog, you’ll know that we are fans of changing the straps and bracelets of our Rolex watches. It’s a simple and economical way to completely change the look of a Rolex. From sporty metal bracelets to classic leather straps to elegant suede bands to robust rubber straps to military-inspired NATO bands, the choices are endless. If you’ve never removed the bracelet from your Rolex before, it can be a daunting undertaking at first. But not to worry, read our handy guide on how to change straps and bracelets on a Rolex watch and soon you’ll be a pro.

Change Straps and Bracelets
Changing your strap is a great way to change the look of the watch.

Step 1: Tools Needed to Change Straps and Bracelets on a Rolex

To change the straps and bracelets on a Rolex, you’ll need a couple of tools.

  1. A spring bar tool. Alternatively, if you don’t have a spring bar tool, you can use a pushpin, a paperclip or even a few sturdy wooden toothpicks. Any of these will work.
  2. A soft cloth to lay your Rolex on while you’re working on it.
  3. A small dish or tray to hold small pieces.
Crown Vintage Rolex Submariner
The first step would be to see if you have lug holes or not.

Step 2: Does Your Rolex have lug holes or not?

If you take a look at the lugs on your Rolex watch—the metal protrusions that extend out from the case where the bracelet is attached—take note if there are any holes on the sides or not. Older Rolex models have holes on the lugs while newer models typically don’t.

As you can imagine, changing straps and bracelets on a Rolex with holes in the lugs is easier than if there aren’t any. But either way, it can be done; it’s just a slightly different approach.

rolex submariner
In that case where your watch has lug holes, you’ll need to follow this step. If not, you can ignore this step.

Step 3A: Removing the Bracelet on a Rolex with Lug Holes

On a Rolex watch, the bracelet is secured to the case via spring bars. Therefore, to remove the bracelet, you have to dislodge the spring bars that are fitted into the lug holes. So if your Rolex has lug holes, you simply have to insert your spring bar tool into one hole to retract one end of the spring bar, which—with a bit of nudging around—will eventually free your bracelet from the case. If you do not have a Rolex spring bar tool you can alternatively use a pushpin, paperclip or toothpick, but we recommend using the Rolex spring bar tool.

When one end of the bracelet has been removed from one end of the case, pull the spring bar out from the bracelet end link and set it aside in your tray. Repeat the same step on the other side of the case to remove the other end of the bracelet from the case. Again, pull the spring bar out from that end link and place it in the tray.  

Changing straps and bracelets
Without holes you need to approach the lugs from the back.

Step 3B: Removing the Bracelet on a Rolex without Lug Holes

If you’re dealing with a Rolex watch without lug holes, hold your Rolex with the caseback facing towards you and you will see four small spaces where the bracelet spring bars are attached to the lugs. Using your tool, push the one side of the spring bar away from the lug through the small space until it dislodges from the lug. Repeat on the other side of the same spring bar until the bracelet is completely removed. Pull the spring bar out from the bracelet end link and set it aside in your tray. Repeat the same process on the other side of the case.

Changing the strap and bracelet
Enjoy the final product with a leather strap.

Step 4: Attaching another Band to your Rolex

Take the other band, let’s say a leather strap, that you want to attach to your Rolex. Thread one spring bar from your tray into the leather loop side that will attach to the case side. Hold your Rolex with the caseback facing towards you. Align the leather strap with the spring bar on top of lugs, and using your tool, press one end of the spring bar back, push the bracelet down slightly so that the spring bar releases back into the hole for a secure fit.

Repeat this step on the other side of the same strap piece. Wiggle the strap a bit to ensure that both ends of the spring bar are perfectly fitted into the holes. Repeat the same steps with the other leather piece and spring bar to attach it to the other side of the case.

A new strap on your Rolex can completely change up the look of your watch. Whether you like leather, NATO straps or the original bracelet it comes with, knowing how to change the strap/bracelet is important.

Paul Altieri
  1. Thanks for the super instruction of how to change the wristband on my Rolex. I’m sure it will also work on my Tag Heuer.
    Kind regards
    Thomas (Denmark).

  2. Dear sir. I have my fathers Rolex Date it is 1964. I want to replace the jubellee bracelet. Are they available and are there good copies. Also are their real good used authentic bracelets? I would by a tight and good used original. Thanks Ted.

    • Rolex will be able to supply you with a brand-new bracelet during the service of your watch, however replacement bracelets are often rather expensive. Generally speaking, Rolex keeps very tight control on the supply of its bracelets, but you may have some luck finding genuine bracelets (both new and used) on the secondary market from sellers on the various forms/etc.

    • Rolex keeps very tight control over the supply of its watch components (bracelets included), so only Rolex will be able to supply you with a replacement clasp/bracelet. With that in mind, Rolex will also only sell you one if your watch was originally designed to have one (for example, Rolex will not sell a Glidelock clasp to an owner of a Submariner from the previous generation who just wants to upgrade their bracelet). All of that being said, it is not impossible to find bracelet components on the secondary market, so you may have some luck sourcing one through the various forums.

  3. I have mislaid the small pin which connects the two ends of the watch bracelet. Not the pushpins but the smaller pin which goes through the two bits of metal by the strap connector. I have date just watch with a Rolex stainless steel strap.
    Do you by any chance have one. Thank you.

    • There are a number of different pins in the bracelet and these can differ depending on the specific style of bracelet, along with the bracelet generation. We don’t sell bracelet parts separate from watches but provided that it is a bracelet style/generation that is still in production, your nearest authorized Rolex retailer will likely be able to help you out with whatever you need.

    • We don’t sell Rolex bracelets by themselves, but your local authorized Rolex retailer should be able to order you the correct bracelet you need and provide a quote for what it might cost.

  4. I just purchased a Rolex Day Date President from Bobs Watches. Is it possible to add links to the bracelet for sizing? Thanks, Bill Singer